KREMER Canadian liquid multi purpose fish glue, 100 ml

 KREMER Canadian liquid multi purpose fish glue, 100 ml.   

        IN BRIEF

              - used by Martin Guitars to (re)glue ABS and wooden bindings

              - can also be used for bridge plates, braces, necks resets,

                 fingerboards, saddles & nuts, as well as for securing knobs

                 and switch tips in place

                 (not strong enough for glueing bridges and broken pegheads)

              - dries yellow-transparent/light caramel

                 (amber-tan to order only – please note lead time)

              - can be applied right out of the box: no mixing or heating needed

              - close alternative for hide glue (but has a little less stronger bond)

              - fish glue can be cleaned up with a towel and warm water

              - glued parts can be released with heat (steam and water)

        FEATURES

              - fish glue has the convenience of Titebond, has the favorable qualities

                 of hide glue, but cures harder

              - first choice when a long(er) open time is required (but fish glue

                 takes longer to cure: 12 – 24 hours)

              - water clean-up

              - non-flammable

              - water reactivates dried fish glue, making the bond sticky again for reworking

        IN USE

              - apply the absolute minumum amount of glue you can can get away with

              - keep a bowl of warm water and a towel nearby to rinse the glue off your

                 fingers if needed

              - leave the part(s) taped, roped, or clamped for at least 12 – 24 hours –

                 or longer if possible

              - allow for a 0.30 mm of swelling

              - if stored in a fridge, fish glue has a 10 year or more shelf life

              - preferably used at room temperture once the glue has returned

                 to normal viscosity